Innotek UltraSmart Pet Fence | Dog Fences & Training Supplies

NOVEMBER SPECIAL! Order the Innotek UltraSmart Pet Fence IUC-4100 from www.dognpuppysupply.com and receive a $40.00 REBATE! See below REBATE INSTRUCTIONS.

Free Shipping on our INNOTEK UltraSmart in-ground pet fencing system that has set a new standard.

The difference is in the sleek, streamlined contoured comfortable fit collar -- 30% smaller and lighter than other containment receivers.

The Innotek Ultra systems are Superior, Smarter, and Safer than any other systems. Technology makes the difference.

This system is the quickest way to keep your dog safe in the yard. We’ve taken elements of our best-selling in-ground fencing and added the collar that consumers told us they want!

The sleek, ultra-thin collar offers cutting edge technology and is lighter and more comfortable than other containment solutions.

Kit Includes:
Wall Mounted Transmitter
Waterproof Ultra Receiver Collar
Collar Charging Station - simply plug into any standard outlet
500 ft. of Wire
50 Boundary Flags
2 Waterproof Wire Splices
Instruction/Basic Training Manual
Instruction/Basic Training DVD
One set Long-Hair Prongs
One set Short-Hair Prongs

Features - The Ultra Difference
Pure Digital Signal: Eliminates interference from stray signals. Computer aided electronics allows for smooth and consistent operation. Our micro processor works twice as hard as others and takes less signal to activate correctly. The NEW Sensitive approach to pet containment systems mean's a more accurate correction point.

Most Humane System: Innotek’s computer aided electronics continues to offer the most advanced and most humane systems available. All Innotek systems monitor your dogs position and speed from the buried wire.

Progressive Correction: (Run Thru Prevention) All Innotek systems offer progressive correction, and ONLY Innotek systems, because it is a US Patent. If it isn’t Innotek its not Run Thru Prevention. If it isn’t Run Thru Prevention it is not the best system available in the US.

Receiver Built into the Collar: All other collars have a box which hangs off on the collar.

Contoured Collar Receiver: To match the curved contour of your dogs neck. The result is the most comfortably fitting collars available.

The Small and Lightweight Collar: The Ultra collar is over 30% smaller than any other collar and weighs less than 2 ounces.

Rechargeable Lithium Ion Battery: Lithium Ion batteries Last Longer and Charge Faster than any other batteries. Batteries fully charges in just 2 hours.

Ready Test Self-Diagnostics: Performs a collar Self-Diagnostic assuring you of proper collar operation. With this system you know the collar is operating correctly, with all others you have to guess.

Self-Diagnostic for Proper Collar Fit: Eight out of ten times your dog walks out of the safety of the containment area it is because the collar did not fit correctly. With this system you know the collar is properly fit, with all others you have to guess.

Auto–Safety Shut Off: Prevents unnecessary exposure to a corrective stimulation. After shut off the unit will reactivate automatically.

Battery Status:. The collar tells you if you have a good charge, a weak charge or needs to be charged. Built-in 24/7 battery backup in the event of power failure.

Waterproof – Collar will stand up to rough punishment, even submerged in water.

Compatible with the Innotek Zone Indoor Systems: Restrict your dog from areas of your home, or furniture, rooms, or doors, simple add a ZND-1000 Zone transmitter to your order. Zone Discs are a great way to contain your dog in certain areas in the home or prevent him from going where he shouldn't.

Built-in lightning and surge protection for storm-prone areas: If you live in an area that is highly prone to lightning or surges, you may want to consider our Lightning Protection Module. Regardless, your system is covered under warranty against lightning or surge damage

Patented Run-Through Prevention, only offered by Innotek, offers reliable and secure pet containment. Others may say it but only Innotek has Run-Through Prevention.

REBATE INSTRUCTIONS:To receive your $40.00 Rebate, simply email dognpuppysupply@gmail.com Include your name and a request for your $40.00 rebate. Your rebate will be issued immediately back to the same credit card or method you purchased with.

Accessories available for this Item: (see Accessories for Underground Dog Fences)
Extra Receiver IUC-4225
100' of Twisted Wire BD-01
Lightning Protection LP-4100-1
Direct Burial Splice 3M-316
Zones Transmitter ZND-1000
500' Wire & Flags RFA-500
1000' Wire & Flags RFA-1000
Fence Staples SS-100
(You should order one box of Fence Staples for every 500 feet of wire. Use one Fence Staple every 5 feet for best results.)

Recommended Accessories:
*Extra Receivers - If you have more than one pet, you will want to order an extra receiver for each additional pet.
*Extra Wire and Flags - If your yard is larger than 1/3 acre, you will need additional wire and flags. See our Wire Calculator to see how much wire you need.
*Fence Staples. Avoid having to bury the wire and cut your installation time in half.
*Direct Burial Splices. These are waterproof splices that virtually eliminate any problems in the future with your splices.
*Twisted Wire. Save the time and trouble of twisting your boundary wire. Twisted wire is needed to cancel the signal from the transmitter to the outer perimeter allowing your pet access around you home without getting a correction.
*Zones Indoor Transmitter. Contain your dog in certain areas in the home or prevent him from going where he shouldn't.

Wire Calculator
Use this guide to determine how much wire you need to enclose your yard. These figures are estimates, based on typical layouts. You may need more wire if you're doing interior loops to boundary off gardens, swimming pools or other protected areas. We will provide you wire in 500 foot increments on 500 or 1,000 foot spools.

To Cover This Size Area: You Need This Amount of Wire
1/3 Acre: 500 Feet
1/2 Acre: 600 Feet
1 Acre: 1000 Feet
2 Acres: 1300 Feet
3 Acres: 1500 Feet
4 Acres: 1800 Feet
5 Acres: 2000 Feet

For larger areas, use the following formula: Multiply the total acreage by 43,560- i.e. 10 acres x 43,560 = 435,600

Find the square root of the above number - square root of 435,600 = 660 (this is the length of each side of a 10 acre area that is square in shape. Even if your area is not square, if you multiply this number by four, this is the approximate length of the four sides of a 10 acre area.)

Therefore, one would need approximately 2,640 feet of wire to enclose the perimeter of a 10 acre area. You will need additional wire to run from the transmitter to the perimeter and/or for any interior loops, etc.

Above Ground Installation -
Save the back-breaking task of burying wire and cut your installation time in half!
These instructions will not be included with your pet fence. You should print this page if you are going to use the Above Ground Installation method.

A common misconception about "Underground Fencing" is that is needs to be buried "Underground". This unfortunate but understandable misconception often scares many people away from enjoying the freedom that these fences provide both you and your pet.

There is no need to spend a weekend burying the wire underground, or paying some one hundreds of dollars to bury the boundary wire when it can be installed above ground in only a matter of an hour or two.

Using wire pegs you can "Staple" the wire to the ground. Within a matter of 7 - 14 days the root system of your lawn will grow over the wire and hide it completely from view, essentially "Burying" it into the lawn. Not only does this make the installation of your new pet containment systems hassle free, it also eliminates any potential loss of signal that may result from burying the boundary wire under several inches of dirt, not to mention the backaches and blisters it will save you.
The procedure is simple:
Step 1:
1. First run your twisted wire from your transmitter out to the beginning of your boundary.
2. Now "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 6 feet.
3. Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? If not go and "Staple" any raised areas before proceeding to the next step. The wire MUST completely touch the ground.

Step 2:
1.Next, place a "Staple" where the twisted wire and the beginning of the boundary meet (if you have a splice in this area please dig a small hole about 2 inches deep and bury the splice. Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice)
2. Now walk the wire to the first corner of your boundary and "Staple" it to the ground. Repeat this step for all four corners of your boundary.
3. Next go back just as you did with your twisted wire and "Staple" any raised areas down until they are completely flush with the ground.

You are now done!!! It is that simple.
You have no need to worry about people tripping over the wire because it is completely flush to the ground and will be completely hidden within 7-10 days. You also do not need to worry about your lawnmower cutting the wire as the blades will never get anywhere near the wire. Nobody cuts their lawns to shorter than an inch, with the vast majority of people keeping them at 2" - 3" inches, the wire is flush to the ground and cannot be cut.

There are really only a couple of instances where burying the wire is preferable.

If you are putting a fence into a pasture area where livestock such as horses or cattle will frequent, then you will want to bury the wire as their hooves will create breaks. In this case you will want the wire at least 8 - 10 inches underground.

If you frequently have your yard aerated you will want the wire at least 5 - 6 inches in the ground. Although if you do an above ground installation you can simply avoid the exterior boundaries when performing the aeration.